Setting materials as customer-supplied
On the part's card you may set the part to be from customer supplied material, to do this, simply slide the "Customer supplied material" option to the right; it will turn orange.
Customer supplied material, 'Off'
Customer supplied material, 'On'
Selecting a part to be calculated using the customer-supplied material will change how the price is calculated for the parts, rather than using the material price for the parts we would calculate the price based on a percentage of the material cost as a handling fee which is determined in your Materials page, as highlighted below.
Customer-supplied setting in Materials page.
The price that would be charged for a sheet of material supplied by you is:
SheetSellPrice=SheetCostPrice∗(1+AppliedMarkup)
Example: A full sheet that costs $100 per sheet and has a 35% applied markup would be sold for $135.
The price that would be charged for a sheet of material supplied by your customer is:
SheetHandlingFee=SheetCostPrice∗HandlingFeePercentage
Example: A material group has a 15% handling fee on all sheets. If a customer supplies a sheet of material for their parts and you have that sheet as costing $100 per sheet, a handling fee of $15 will apply per sheet of material used in supplying their quoted parts.